auspice-conf

#
# *+.+**+.+**+.+**+.+**+.+**+.+**+.+*
# *+.+* EasyNets Services *+.+*
# *+.+**+.+**+.+**+.+**+.+**+.+**+.+*
#
# This is EasyNets Services sample config file
# Created By Dj-RuFfy @ EasyNets
# Special Thanks To My Lovely Julia

# Remote Server, the irc server where services would connect to
# ex: 209.20.92.45
S:98.129.237.176
A:Angels3

# Port where Services will connect to
P:6667

# Connect Password where it's place in C/N line in server
# services connect to.
X:services

# Services Server Name
N:services.angels3.com

# Services Describe
D:EasyNets Services IRC Network by Dj-RuFfy N Estrada

# Services Admin Full Name, this will show in /admin sevices.*
# Note: No space allow
ANAME:Dj-RuFfy

# Services Admin E-mail
AMAIL:root@angels3.com

# Services E-mail (show in reply when services send any e-mail to someone)
PMAIL:ruffy@angels3.com

# Services User for NickServ/ChanServ...
U:services

# Services Host for NickServ/ChanServ...
H:easynets.org

# Service Master Nick Name
# This nickname must first register.
M:Dj-RuFfy

# Service Co Master
R:tian

# Define Services Name Follow
MEMOSERV:MemoServ
HELPSERV:HelpServ
OPERSERV:OperServ
ROOTSERV:RootServ
HOSTSERV:HostServ
BOTSERV:BotServ
GLOBAL:Global

# NickServ

# Services Nick Name
NICKSERV:NickServ

# Nickname expire
NICKEXP:21

# Auto set mode on register
# 1= Enable 0= Disable
KILL:0
SECURE:0
PRIVATE:0

# Allow Add channel VOP/HOP/AOP/SOP/CFOUNDER by using access mask
# 0= YES 1= NO
ACCESS:1

# Allow user using ListChans Command
# Default = 0, 1 = Enable
ALLOWCLIST:1

# Maximum permitted mask enteries per nick access list.
# Default: 20; 0 Disables
U_ACC_MAX:20

# Ammount of seconds to automatically release an enforced nick.
# Default: 30
RELEASE:30

# ChanServ

# ChanServ Nick name
CHANSERV:ChanServ

# Define expire data for channel
CHANEXP:21

# Maximum permitted enteries per channel access list.
# Access list = AVOICE+HOP+AOP+SOP+CFOUNDER as a sum.
# Default: 900; 0 Disables
C_ACC_MAX:900

# Changes default #Snoop channel.
SET_SNOOP:1
SNOOPCHAN:#debug

# Maximum channels permitted to be registered per user.
# Default: 20, 0 = Disable
CHANREG:20

# Maximum amount of auto-kick's for a channel.
# Default: 100, 0 = Disable
AKICK:100

# Maximum channel suspensions services will keep.
# Default: 256
SUSPEND:256

# Default: +rtn, Disable: +
MLOCK:+rtn

# Defines how long, in seconds, ChanServ should retain in
# a channel after a masskick or suspension.
# Default: 15
CHANNEL_INHABIT:15

# TOPICFIX This option will prevent
# services from adding duplicate nicks to the topic.
# Enable: 1, Disable: 0;
TOPICFIX:1

# Auto update Database on NickServ/ChanServ/MemoServ/HostServ changed
# Enable: 1, Disable: 0
# Not warranty it's safe for your data in this option
# I haven't test yet if you do it please give me the result
AUTOUP:0

# Number of seconds which database update/expires
# 900 = 15 minutes = 15 * 60
UPDATE:900

# Should not touch, if you running a slow server you may put it to 5
TIMEOUT:3

# Limite badpass identify to Chan/Nick Serv
PW_LIMIT:4

# Number of seconds which services forget the badpass attempts
PW_TIMEOUT:1800

# Number of Memo permit per user
MEMOMAX:20

# Number of seconds that must elapse sending memo
MEMO_WAIT:5

# Nick/Chan/Memo Expire day
MEMOEXP:21

# Max Number of permit Services Root
ROOTS:5

# Max Number of permit Services Admin
ADMINS:30

# Max Number of permit Services Oper
OPERS:40

# Max Number of permit Helper
HELPOPS:20

# Max akill add, 0 disable
AKILLS:128

# Maximum permitted "jupitered" servers. Default: 12; 0 Disables
JUPES:12

# Maximum permitted triggers. Default: 128; 0 Disables
TRIGGERS:128

# Default AKILL expiry time in seconds. Default: 86400 (1 day)
AKILLEXP:86400

# Number of client found before notice as clone
CLONES:6

# Number of seconds between consecutive clone warming from
# the same host. Default: 10
# Note: -It will not keep warming unless more clones ware loaded
CLONE_WARN:10

# Max charaters permit in memo
MEMO_LEN:225

# Enable or Disable sending log files via email
LOGS:0

# Enable Services +a umode flag. With this setting
# enabled, any services admin identifying to their
# nick will have services set umode +a.
# This option also allows services admins to use /samode.
# Enable = 1; Disable = 0; Default = 1
UMODE_a:1

# Maximum permitted Services q:lines. These are
# viewed via /stats q, not /stats Q.
# Default = 64; 0 Disables
QLINES:64

# Maximum permitted Services global z:lines.
# Default: 128, 0 Disables
ZLINES:128

# Allow users to have their memos sent via email.
# Sendmail must be working on the computer services
# are running from. Default = 1; 0 Disables
EMAIL:0

# If you wish to have your own notice when any client
# connects, enable this, and edit "messages.h" where it
# says "CUSTOM_WELCOME". You must recompile in order for
# it to take effect. 1 = Enable, 0 = Disable; Default: 0
CUSTOM:0

# If you want to keep the generic welcome notice each
# unregistered nick receives on connection, enable this.
# 1 = Enable, 0 = Disable; Default: 1
GENERIC:1

# When enabled, users will be /kill'ed off the network with
# the specified AKILL reason the operator gave. When disabled,
# the generic AKILL message will be given. (Found in messages.h)
# 1 = Enable, 0 = Disable. Default: 1
AKILL_REASON:1

# This option is not limited entirely to snoop, but also log files.
# When enabled, extra information will be logged, and if snoop
# is enabled, sent to the snoop channel. On larger networks,
# it may be wise to disable this to save on disk space for logs
# and avoid being flooded in the snoop channel. Only non-essential
# information will be stripped, ie: valid identifies, etc.
# 1 = Enable, 0 = Disable. Default: 1
EXTRA_SNOOP:0


# Number of registrations until services will
# automatically update the databases, regardless
# of next scheduled event. Valid for nicks & channels.
# 0 = Disables, 1 = Enables; Default: 0
REG_SAVES:0

# Enable displaying routine database expire & save
# global notices.
# Default: 1, Disable = 0
DISPLAY_UPDATES:0

# This allows services to display the uptime in the MOTD.
# Enable: 1, Disable: 0; Default: 1
UPTIME:1

# This allows services to display the time time until the next
# database update in the MOTD.
# Enable: 1, Disable: 0; Default: 1
MOTD_UPDATE:1


# Allow flood levels. These are used to warn the network
# of abusive users that are flooding. Services will first
# warn via globops, and notice the user, then warn if
# the user is severely flooding services. Further abuse
# results in the user being killed. Default = 1; 0 Disables
SET_FLOOD:1

# Allow ignore code to be used. When enabled, services
# admins will be able to make use of the OS IGNORE
# command to have services ignore all commands from
# a nick!user@host.
# Default = 1; 0 Disables
SET_IGNORE:1

# Have services set Read Only mode. Any commands
# that may effect databases will not be permitted.
# Default: 0; 1 Enables; 0 Disables;
SET_RO:0

# This setting enables "Real Name Catching". Services
# will match /whois realnames against an internal list
# provided. Whois' which contain words such as "*admin*"
# or "irc*op*" will be triggered and globoped with a
# warning.
# Default: 1; 0 Disables
SET_RN:0

# This feature will allow services to create a duplicate
# back-up database after database updates.
# The backup database will be stored in data/backup.
# Default: 10, 0 Disables
BACKUP:10

# 0 Defualt, 1 Make services do Private message instead of Notice
# It's good for WebTV user
SPRIV:0

# Enable Auto Join Channel
# 1 Enable, 0 Disable
AUTOJOIN:0
AUTOJOINCHANNEL:#3angels

# Enable Auto Join on Oper
# 1 Enable, 0 Disable
OPERJOIN:0

# Show user on register nick/chan, RootServ auto join that channel
# Mark as Official Help Channel
OPERCHAN:#staff

# Enable or Disable Flag JOIN for channel
# Make ChanServ join non 0 user channel when JOIN FLAG set by founder
# 1 Enable, 0 Disable
CJOIN:0

# There address of where your e-mail would go
SENDMAIL_PATH:/usr/sbin/sendmail

# Hide the next database update info
# 0 = Show the info, 1 = Hide it
HIDEUME:1

# Notice IRCop when any nick/chan registered
# 1 = Enable, 0 = Disable
REGNOTICE:1

# Prevent Akill being added if percentage is greater than this setting
PERCENT:50

# Sending E-mail to nearly expire nick.
# 0 = disable, 1 = enable
ALLOWMAIL:0

# Spam Detector
# Spam Nick
SPAMNICK:vitanizer
SPAMUSER:ninche
SPAMHOST:Services.angels3.com

# URL Note all URL must not include http://
# NickServ URL
NSURL:easynets.org/html/ns.htm
# ChanServ URL
CSURL:easynets.org/html/cs.htm
# Being Guest
GUESTURL:easynets.org/html/guest.htm